Publication in the Diário da República: Despacho nº 9182/2020 - 25/09/2020
7 ECTS; 2º Ano, 1º Semestre, 105,0 TP + 4,0 OT + 3,0 O , Cód. 964446.
Lecturer
- Paula Alexandra Costa Leite Pinto Pereira (2)
- Miguel Alexandre Pereira Sanches (1)(2)
(1) Lead Professor
(2) Teaching Professor
Prerequisites
Not applicable
Objectives
Students should be able to:
1- Correctly prepare printing forms for various printing processes.
2- Set up and fine-tune a sheet-fed offset press.
3- Produce 1-, 2-, and 4-color print jobs while adhering to quality parameters.
4- Identify and correct recurring printing defects.
5- Evaluate the technical quality of the printed product using quality control criteria.
Program
OFFSET
1- Description and identification of the main printing processes.
The lithographic process and its development into offset printing.
1.1- Classification of offset printing machines;
1.2- Main components of offset machines;
2- Setting up, adjusting and printing on offset equipment
2.1- Setting up the main components of an offset printing machine;
2.2- Preparing for offset printing;
2.3- Printing on small format sheet-fed offset equipment;
3- Production of 1, 2 and 4 colour offset prints
3.1- Position proofs;
3.2- Error detection;
3.3- Correction of the main printing errors;
3.4- Quality control;
PRODUCTION OF MATRICES
4- Production of printing matrices;
4.1- Phototransport process;
4.2- Production of different types of printing matrices;
5- Quality control.
Evaluation Methodology
Continuous Assessment
Assessment is based on the following components:
OFFSET
Practical assignments: 60%
Written assessment (minimum grade of 10/20): 35%
Active participation: 5%
PLATE PRODUCTION
Practical assignments: 65%
Final report, worksheet, test, or theoretical assignment (minimum grade of 10/20): 30%
Active participation: 5%
Students are exempt from the final examination upon achieving a minimum grade of 10/20 in both components.
Students admitted to the examination must complete a written assessment in the OFFSET component. No examination assessment is available for PLATE PRODUCTION, due to the practical nature of this component.
Students who attend fewer than two-thirds of classes and/or obtain less than 10/20 in the practical assignments are not eligible for examination.
Examination Assessment
OFFSET
Practical assignments: 60%
Written examination (minimum grade of 10/20): 40%
The final course grade is weighted as follows:
OFFSET: 70%
PLATE PRODUCTION: 30%
Bibliography
- Baer, L. (1999). Produção Gráfica. S. Paulo: SENAC
- Bann, D. (2007). The All New Print Production Handbook. New York: Watson-Guptill Publications
- Barbosa, C. (2009). Manual prático de produção gráfica. Lisboa: Principia
- Dias, R. e Sanches, M. e Delgado, M. (2024). Papel, Papel, Papel. Fabrico, Propriedades, Manipulação.. Espinho: ItemZero
- Evans, P. (2004). Forms, Folds & Sizes. Massachusetts: Rockport Publishing
- Formentí, J. e Reverte, S. (2008). La Imagen Gráfica y su Reproducción. Barcelona: Ediciones CPG
- Kipphan, H. (2001). Handbook of Print Media: technologies and production methods. Berlin: Springer-Verlag
- Pipes, A. (2001). Production for Graphic Designers. Londres: Laurence King
- Ryberg, R. e Johansson, K. e Lundberg, P. (2011). A Guide to Graphic Print Production. New Jersey: Wiley & Sons
Teaching Method
1-Theoretical lectures supported by audiovisual resources.
2-Demonstration of technical procedures, group laboratory exercises, print production troubleshooting, and workshop-based practical projects.
Software used in class
Not applicable

















